Products

Inhibitor Barking - IL-03

Characteristics

Technical characteristics:

Supply Voltage: 90V - 240V (dual voltage auto)
Power: 1W
Power consumption: 0.001 Kw / h (green LED flashing)
Virtually zero power consumption in standby (stand bye) (red LED)
Operating Frequency: 20-30 kHz adjustable
Emitting activities area: opens a cone of 120 ° (horizontal) and 90 ° (vertical) and reaches approximately 10m in a straight line.
Sensitivity - 92dB + or - 3 dB / W 10cm
Operating Temperature: -20 ° / +60 °
Source switching - 12V DC 1A.
Cable to connect power supply to the transmitter block: 5m long

Description

The Inhibitor barking mod.IL-03 was developed to educate dogs, avoiding unnecessary barking. When you reach a certain level of sound, caused by the barking, the appliance starts ultrasonic emission for 10 to 15 seconds (green LED flashing lights) coming in, the standby (red LED lights). The inhibitor can be triggered with any ambient sound of low frequencies is normal operation.

Instructions for use:

• The appliance must not be installed behind obstacles;
• The source must be sheltered from moisture, the transmitter module can be installed in time;
• This must remain on uninterrupted;
• Install the unit at an approximate height of the dog (with set screws) directed to sites where you want to inhibit barking;
• Connect the power supply plug;
• Connect the power supply network and check that the lamp is lit;
• Device has flashing green LED indicates that ultrasonic emission and red LED that indicates the state (stand bye).
• Check the operation of the device by tapping the palms ascend the LED flashing green and approaching the imam of the sensitive area on the side, yellow circle, will trigger the sensor test. Sensor test transforms the sound waves audible to the human ear to check the appliance. It is forbidden to approach the ear of the emitters when the test performed to avoid possible damage to the auditory system.
• To adjust the sensitivity of noise at the bottom of the device, use philips key, which is supplied with the appliance, turning clockwise to increase sensitivity and counterclockwise to decrease sensitivity.
• To adjust frequency at the bottom of the device, use the key philips, which is supplied with the appliance, turning clockwise to add frequency and counterclockwise to decrease frequency by adjusting for best effect bear fruit in relation to the dog.

We advise not to change the factory setting of the frequency before checking the results.