Products

he Electronic Repellent MGII IND has been developed to scare away rats and bats to large industrial areas without harm to the environment or animals.
Its working principle is based on ultrasound emission (above 20 kHz) of leaving the rats unable to sleep and communicate, and the bats, interfere with biological ultrasonic radar, leaving them disoriented and forcing them to abandon their dwellings.
The positive effect appears gradually from four to six days, depending on the area covered.
You will achieve better results with the correct installation of the appliance.

DESCRIPTION OF DEVICE

  power supply
1. LED operation indicator.
2. Depart for connecting blocks emitting ultrasound.

100m of mains cable with plug

  Block Ultrasonic Generator (BGU)
1.Bloco generator with two emitting ultrasound.
2.LED power indicator.
3.Sensor test. Transforms the sound waves audible to the human ear to check the appliance.

Approaching the imam of the sensory area (highlighted circle) will trigger the sensor test.
It is forbidden to approach the ear of issuers when performed the test. Damage may occur to the auditory system.

The ultrasonic generator block automatically assume polarity.
OBS:. Sound propagated by ultrasonic emitters opens a cone of about 60 °, reaching between 30m to 35m straight. Ultrasound does not surpass obstacles.

RECOMMENDATION OF INSTALLATION

Open, distribute and secure the power cord with 100 (2x0, 50mm ²) (the plug on the end will be where the plant will be installed);
Distribute and fix generators blocks protected from moisture and high temperatures;
Connect the generator to the power cord, regardless of polarity blocks, insulating links.
Place the power supply (BC) 12V DC housed in moisture and close to a 100/220V (uninterrupted power should be) taken place;
Distribute the ultrasonic emitters with 5m cable fixing them with screws.

To repel rats, fix the ultrasound emitting approximately 20 cm from the floor, directing to the possible locations of access rats (doors, windows, holes, etc.), as the local geometry and the presence of obstacles (walls, shelves, sacks, etc ...).

For food or other industries with favorable local conditions for the existence and reproduction of rodents, we recommend continued use of the device by installing the external emitting sound every 5m to 6m, protecting the perimeter of the building.

To repel bats, outdoor installation, fix issuers ultrasound the closest possible entries, with the greatest possible extent. For indoor installation, seek cover the largest possible area, avoiding obstacles that hinder the passage of ultrasound.
Check the wiring and plug the cable into the power source;
Connect the power supply network. The lit LED indicates normal operation;
Check the operation of transmitters blocks through lit with LED changing light and the "Sensor Test" (each module). The sensory area in the circle is highlighted.

WARRANTY - against manufacturing defects: 1 year from the date of purchase. We are not responsible for defects arising from accidents and falls mishandling.